Ricoh Aficio 6010 Page 195 Operating Instructions Manual Download

Page: 195 / 282

179

What to do if Something

Goes Wr

ong

Adding Staples

CAUTION:

•

This machine has been tested for safety using this supplier’s parts and consumables. We
recommend you only use these specified supplies.

Note

❐

If you use a staple cartridge other than that recommended, staple failure or staple jams might occur.

Open the sorter stapler front cover, then pull the
R3 holder and pull out the stapler unit.

Push the cartridge forward to release it.

Pull out the cartridge.

Remove the empty refill in the arrow direction.

Align the arrow mark on the new refill with that
on the cartridge and push the new refill into the
cartridge until a click is heard.

Pull the ribbon out of the cartridge.

Adding Staples

Summary of Contents for Aficio 6010



























































































































































































































































































Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands

Ricoh Aficio 6010, Operating Instructions Manual

Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands