Ricoh AC122 User Manual Download Page 206

Page: 206 / 278

ROUBLESHOOTING

9.3

Align the left end of the ADF roller with the slot and push
the right end of the ADF roller into the right slot (

Rotate the bushing on the right end of the roller toward the
document input tray (

Close the ADF cover. Then load the removed page(s), if any,
back into the ADF.

OTE

: To prevent document jams, use the document glass for

thick, thin, or mixed paper-type documents.

Exit Misfeed

Remove any remaining page(s) from the ADF.

Open the document cover and turn the release knob to
remove the misfed documents from the document output

tray.

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands