Ricoh AC122 User Manual Download Page 157

Page: 157 / 278

AXING

7.10

The document types recommended for the resolution settings

are described in the table below:

OTES

• For memory transmission, Super Fine mode is not available. The

resolution setting is automatically changed to Fine.

• When your machine is set to Super Fine resolution and the fax

machine with which you are communicating does not support

Super Fine resolution, the machine transmits using the highest

resolution mode supported by the other fax machine.

Mode

Recommended for:

Standard

Documents with normal sized characters.

Fine

Documents containing small characters or thin

lines or documents printed using a dot-matrix

printer.

Super Fine

Documents containing extremely fine detail.

Super Fine mode is enabled only if the

machine with which you are communicating

also supports the Super Fine resolution. See

the notes below.

Photo Fax

Documents containing shades of gray or

photographs.

Color Fax

Documents with colors. Sending a color fax is

enabled only if the machine with which you are

communicating supports color fax reception

and you send

the fax manually. In this mode,

memory transmission is not available.

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands