Ricoh AC122 User Manual Download Page 249

Page: 249 / 278

SING

OUR

ACHINE

ETWORK

A.4

In the

Enter a port name

field, enter the shared name.

Click

and click

Close

For Windows NT 4.0, click

For Windows 2000/XP, click

Apply

and click

Setting Up a Network-Connected
Machine

You have to set up the network protocols on the machine to use

it as your network printer.

You can configure the basic network parameters through the

machine’s control panel. Use the machine’s control panel to do

the following:
• Print a Network Configuration Page
• Configure TCP/IP

Configuring Network Parameters on the
Control Panel

Supported Operating Systems

OTES

• The operating systems supported by the network card may be

different from the operating systems supported by the machine.

The following table shows the network environments supported

by the machine.

• Printer driver does not support Windows 95.

• TCP/IP: Transmission Control Protocol/Internet Protocol

Item

Requirements

Network Interface

10/100 Base-TX

Network Operating

System

Windows 98/Me/NT 4.0/2000/XP

Network Protocols

TCP/IP on Windows

Dynamic Addressing

Server

DHCP, BOOTP

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands