Ricoh AC122 User Manual Download Page 152

Page: 152 / 278

AXING

7.5

DRPD Mode

You can receive a call using the Distinctive Ring

Pattern Detection (DRPD) feature, which

enables a user to use a single telephone line to

answer several different telephone numbers. In

this menu, you can set the machine to

recognize which ring patterns to answer. For

details about this feature,

see

page 7.17.

DT Detection

The Dial Tone Detection feature can ensure that

your telephone exchange is ready to receive

the dialing.

Select

if you want to set your machine to

detect the dial tone before your machine start

dialling.

With this feature set to

Off

, the machine start

dialling without checking the dial tone from

your telephone exchanger.

There are regions where the dial tone cannot

be detected by your machine. If the Dial Tone

Detection feature is set to

and dialing does

not start automatically, set this feature to

Off

Display Mode

You can select

Copy Mode

Fax Mode

the Display Mode.

The factory default setting is

Copy Mode

which allows you to enter the number of copies

using the number keypad. In this mode, the

Reduce/Enlarge percentage(%) and the

number of copies are always displayed. To

enter a fax number in this mode, you must first

press the

Facsimile

button, and then enter

number using the number keypad.

You can change the display mode to

Fax

Mode

, which allows you to enter a fax number

using the number keypad. In this mode, the

date and time, memory status percentage(%),

and fax reception mode are always displayed.

To set the number of copies in this mode, you

must first press the

No. of Copies

button, and

then enter the number using the number

keypad.

In either mode, faxes can be both sent and

received, and the one-touch buttons can be

used to start scanning originals immediately.

Option

Description

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands