Ricoh AC122 User Manual Download Page 168

Page: 168 / 278

AXING

7.21

Speed Dialing

You can store up to 200 frequently dialed numbers in one, two,

or three-digit speed dial locations (0-199).

Storing a Number for Speed Dialing

Press

Phone Book

on the control panel.

Press

Phone Book

or the scroll button ( or ) to display

“Store&Edit” on the bottom line of the display. Press

Enter

Press

Enter

when “Speed Dials” appears on the display.

The display prompts you to enter a location number,

showing the first available number.

Enter a speed dial number between 0 and 199, using the
number keypad or the scroll button ( or ) and press

Enter

If a number is already stored in the location you chose, the

display shows the number to allow you to change it. To start

over with another speed-dial number, press

Upper Level

Enter the number you want to store using the number
keypad and press

Enter

To insert a pause between numbers, press

Redial/Pause

The symbol “

−

” appears on the display.

To assign a name to the number, enter the name you want.
For details about entering characters, see page 2.18.

If you do not want to assign a name, skip this step.

Press

Enter

when the name appears correctly or without

entering a name.

To store more fax numbers, repeat steps 4 through 7.

To return to Standby mode, press

Clear/Stop

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands