Ricoh AC122 User Manual Download

Page: 128 / 278

OPYING

5.15

Setting the Time Out Option

You can set the time the machine waits before it restores the

default copy settings, if you do not start copying after changing

them on the control panel.

Press

Menu

on the control panel until “Copy Setup”

appears on the top line of the display.

Press the scroll button ( or ) to display “Timeout” on the
bottom line.

Press

Enter

to access the menu item.

Press the scroll button ( or ) until the status you want
appears on the display.

You can select from 15, 30, 60, 120, and 180 (seconds).

Selecting “Off” means that the machine does not restore

the default settings until you press

Start

to begin copying,

Clear/Stop

to cancel.

Press

Enter

to make your selection.

To return to Standby mode, press

Clear/Stop

Summary of Contents for AC122























































































































































































































































































Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands

Ricoh AC122, User Manual

Search results

Summary of Contents for AC122

Reviews:

Related manuals for AC122

Brands by name

Popular brands