Ricoh A151, Field Service Manual

Page: 323 / 397

NOTE 3: Make copies or perform free run to display the SP mode setting.
The A202 copier displays the SP mode setting in the Copy
Counter. Since the Copy Counter has only 2 digits, the first digit is
displayed in the Manual Image Density indicator as shown below
(digits after the decimal place are displayed in the Copy Counter):
NOTE 4: – A202 copier –
The A202 copier displays the SP mode setting in the Copy
Counter. The first two digits are displayed first. Press the key
once to display the next two digits and press the key one
more time to display the last two digits (six digits in total).
– A203 copier –
The first three digits are displayed in the Magnification Indicator.
Press and hold the key to display the last three digits (six
digits in total).
NOTE 5: The setting will vary depending on the factory setting. Refer to the
"FACTORY SETTING" table located in the upper inner cover.
Rev. 5/30/97
: "0"
: "1"
: "3"
: "2"
: "5"
: "4"
= "3.83"
Copy
Counter
For example:
A203M501.wmf
A202/
A203
Co
p
ier
SERVICE PROGRAM MODE
SM 8-45 A202/A203