Ricoh A151, Field Service Manual

Page: 49 / 397

3. Open the platen cover [A] and remove the pieces of tape & the lock pins
[B]. (FT3013 copier: 2 pins, FT3213 copier: 4 pins)
NOTE: Save the lock pins for future shipping use.
4. Open the front cover [C], and remove the foam block [D].
5. Remove the shipping retainer [E] and tape & seal [F].
NOTE: Save the shipping retainer for future shipping use.
6. Open the upper unit [G] by pressing the release lever [H] (See "Caution:"
below). Gently remove the shipping spacers [I] from both ends of the
transfer/separation corona unit [J]. Remove the strip of tape [K] and
close the upper unit.
CAUTION: Be sure to place and hold your left hand on top of the
upper unit while pushing the release lever to the right with
your right hand. The upper unit will raise with force, and
holding the upper unit will prevent it from lifting too rapidly.
[B]
[A]
[C]
[D]
[F]
[F]
[E]
[G]
[J]
[H]
[I]
IN
S
T
A
LLA
T
ION
FSM 3-5 A151/A152