Ricoh 402334 - IS 200E, Operating Instructions Manual

Page: 32 / 234

Setting Up the Scanner
24
2
1.
140 mm (5.5”) or more
2.
50 mm (1.96”) or more
3.
190 mm (7.48”) or more
4.
378 mm (14.88”) or more
❖ ❖ ❖ ❖
Installation environment
Important
❒
Do not set up the scanner in any of the following types of locations. Doing
so creates the risk of malfunction of the scanner.
• In a location exposed to direct sunlight
• In a location where the scanner will be subjected to blowing air or radi-
ant heat, such as near an air conditioner or heater
• In a location near other electronic devices, such as a radio or television
set
• In a location subject to extreme temperatures or humidity
• Near a humidifier
Set up the scanner in a location where the temperature and humidity will fall
within the ranges shown below.
Important
❒
Save the box and cushioning material in which the scanner was packed so
that they can be used if it is necessary to transport the scanner in the future.
❒
When the machine is moved from a cold location to a warm location, sudden
temperature changes cause condensation inside of the scanner. Wait one hour
or more before turning on the scanner to allow the condensation to evaporate.
ADC123S