Ricoh 402334 - IS 200E, Operating Instructions Manual

Page: 38 / 234

Setting Up the Scanner
30
2
Connecting to a Power Source
This section explains how to connect
this machine to a power source, using
the bundled AC power cord.
R
WARNING:
R
CAUTION:
AAAA
Confirm that the power switch is
set to off.
BBBB
Confirm that the lock switch lo-
cated at the right side of the ma-
ch ine is se t to th e “ U nlock ”
position.
Important
❒
Be sure to confirm the Lock
Switch Status Display shows
“Unlock”, at the right side panel.
Turning on the power with this
lock switch set to “Lock” could
result in failure in scanning or
malfunction of this machine.
CCCC
Push the power cord plug all the
way into the power connector on
this machine.
Note
❒
Be sure to use the power cord
that comes with this machine.
DDDD
Insert the power plug into the
power outlet.
• Do not use with a power
source with a voltage different
from the specified voltage. Do
not use a power outlet with
multiple devices plugged in.
These could create the risk of
fire or electric shock.
• Avoid the use of an extension
cord.
• Do not damage, break, twist or
modify the Power Cord. Plac-
ing heavy objects on the cord,
pulling on or bending it exces-
sively can damage the Power
Cord, creating the risk of fire
or electric shock.
• Never touch or unplug the
power plug with wet hands.
This can create the risk of elec-
tric shock.
• When unplugging from an outlet,
be sure to grasp the plug when
pulling. Never pull on the cord.
This could damage the cord cre-
ating the risk of fire or electrical
shock.
AFJ053S
AFJ059S