Load Ranger Wheel Weigh Pad System
62
Visit our website
www.RiceLake.com
7.4.4 Wheel Weigh Pad and Ai-1 Indicator Setup and Pairing
After the wheel weigh pad and Ai-1 indicator firmware is updated, the wheel weigh pads and Ai-1 indicator require setup.
7.4.4.1 Wheel Weigh Pad RF Module Setup
Perform the following procedures for all required wheel weigh pads:
1. Default the wheel weigh pad (
Section 4.1.2 on page 31
).
2. Calibrate the wheel weigh pad (
Section 5.0 on page 38
).
3. Perform setup as needed (
Section 4.1 on page 30
).
4. Assign ID and channel numbers to the wheel weigh pad(s) (
Section 3.1.3 on page 13
).
NOTE: Channel 27 is default after the firmware is updated.
7.4.4.2 Indicator Setup and Pairing
Perform the following procedures for all Ai-1 Indicators:
1. Perform setup as needed (
Section 4.2 on page 34
).
2. Set the indicator channel to match the wheel weigh pad(s) channel (
Section 3.2.1 on page 16
).
NOTE: Channel 27 is default after the firmware is updated.
