Setup and Operation
© Rice Lake Weighing Systems
●
All Rights Reserved
29
3.9 Setpoints
Follow the procedure in this section to set the setpoint thresholds. See
Section 3.9.1
to change the setpoint functions.
1. Press
to switch the indicator display to the secondary weigh screen.
2. Press
to view the output setpoint settings.
Figure 3-33. Output Setpoint Settings
3. Press within the
Value ON
cell that needs to be changed.
4. Use the number pad to enter a new value and press
.
5. Repeat for additional setpoints if needed.
6. Press
to save changes and return to the secondary weigh screen.
NOTE: Press within the available Output cells to view the current setpoint function.
3.9.1 Change Setpoint Functions
1. Navigate to the
Technical Setup
menu (
Section 4.2 on page 34
).
2. Press
.
3. Press
.
4. Adjust outputs as needed.
5. Press
. A prompt displays.
6. Press
to save changes. The indicator resets and returns to the weigh screen.
>>
SETPOINT
Esc
Outputs setpoint setting
Output
Value ON
Value OFF
1
2
3
4
0lb
0lb
0lb
0lb
OK
Esc
Digital outputs
F5
Esc
Yes
