Setup and Operation
© Rice Lake Weighing Systems
●
All Rights Reserved
13
3.1.2 Display Features
The wheel weigh pad displays the current weight on the platform and applicable annunciators. When paired with the Ai-1
indicator, a wheel weigh pad displays the assigned platform ID number (PLX) instead of the weight.
Figure 3-2. Wheel Weigh Pad Display
NOTE: Internal battery charge level:
Fully charged
–
Medium charge
Low charge
displays prior to the instrument automatically switching off. Charge the battery for at least 12 hours with the
supplied charger after initial startup.
Unstable weight indicator.
Zero weight indicator.
3.1.3 Assign ID Numbers, Turn on RF Radio and Assign Channel Numbers
1. Press to turn on the first wheel weigh pad.
2. Press during startup.
TeCH
flashes, then
CAL
displays.
3. Press repeatedly until
SERiAL
displays.
4. Press to enter the
Serial
menu.
iD
displays.
5. Press to enter the ID settings.
6. Press or to increase or decrease the selected digit and press to move between the digits to enter the
pad ID number.
NOTE: The first Pad ID number must be 01 and the remaining pad ID numbers must increment in ascending numeric order.
Example: 01, 02, 03. Do not configure two pads with the same ID number. See
Figure 3-3 on page 14
for number positioning
7. Press .
Con.rf
displays.
8. Press repeatably until
radio
displays.
9. Press .
RF
displays.
10. Press or until
On
displays.
11. Press .
r.chan
briefly displays.
12. Use arrows to enter a channel number.
NOTE: The default channel number is 27. The wheel weigh pad channel number must match the indicator channel number
it will pair with. The Ai-1 indicator supports channels 00 - 38.
If using multiple groups of indicators and wheel weigh pads,
the channel numbers must be unique for each group.
13. Press .
OK
briefly displays then
Baud
displays.
14. Press until wheel weigh pad resets.
15. Repeat procedure for all wheel weigh pads in the system.
lb
