Installation
© Rice Lake Weighing Systems
●
All Rights Reserved
11
2.5 Weighing of Objects or Structures
The Load Ranger wheel weigh pads can be moved in any position directly below the point in which the structure must be
weighed. Follow the weighing procedure below to weigh objects or structures correctly.
NOTE: Avoid sharp maneuvers, rapidly lowering the load and accidental crashes into or onto the wheel weigh pads.
Weighing Procedure
1. Lower the load to an approximate height of 4 in (10 cm) from the ground.
Figure 2-15. Lower Load
2. Position the load over the platforms.
Figure 2-16. Position Load
3. Place the load slowly onto the platforms.
Figure 2-17. Place Load
IMPORTANT: Do not set the load on the wheel weigh pad display. Always position the displays of the platforms towards the
outside of the structure being weighed in order to correctly transmit the weight reading data.
4 in (10 cm)
