Load Ranger Wheel Weigh Pad System
34
Visit our website
www.RiceLake.com
11. Press . Conversion value is accepted and
Range
_
2
displays.
12. Repeat steps
9
through
11
for remaining ranges.
13.
dec
M
displays.
14. Press three times to exit the Technical menu.
Weight for Calibration
To set the weight for calibration, perform the following:
1. Navigate to the wheel weigh pad Technical menu (
Section 4.1 on page 30
).
CAL
displays.
2. Press .
AduanC
displays.
3. Press .
CaL.Par
displays.
4. Press or until
displays.
5. Press .
displays.
6. Press or until
displays.
7. Press or until
Point 1
displays.
8. Press .
displays.
9. Press , , and until desired weight is set.
NOTE: The Weight parameter value is a conversion value from pounds to the desired units. For example, 1 lb is 0.45359237
kg.
Table 4-4
shows unit conversion values for 1 lb.
10. Press .
Point 5
displays.
11. repeat steps
8
through
10
.
displays.
12. Press three times to exit the Technical menu.
4.2 Indicator Technical Setup Menu
1. Press
to turn on the Ai-1 indicator.
2. During startup, press the upper right corner of the screen when the logo displays to enter the
Technical Setup
menu.
Figure 4-1. Touch Upper Right Corner of the Display
lb Conversion Weight Conversion Unit Conversion Value
1
g
453.59237
1
kg
0.45359237
1
Short ton
0.0005
Table 4-5. Overload Range Settings
