Load Ranger Wheel Weigh Pad System
32
Visit our website
www.RiceLake.com
4.1.3 Wheel Weigh Pad Metrological Configuration
1. Navigate to the wheel weigh pad Technical menu (
Section 4.1 on page 30
).
CAL
displays.
2. Press .
AduanC
displays.
3. Press .
CaL.Par
displays.
4. Press or until
displays.
5. Press .
rEGuL
displays.
6. Press the current metrological parameter displays.
7. Press or until the desired metrological parameter displays then press .
NOTE: OIML
*Zero function clears the existing tare.
NTEP and Measurement Canada
*Indication at zero in NTEP and Measurement Canada with the same number of 0 as character for d. If d=50g the indication at zero should indicate
00 g.
*The Zero function performs the zero only.
*Max value for automatic zeroing = 20%.
*In legal for trade mode, the weight is never shown when master is connected.
Measurement Canada
*Multiple tares are not allowed, tare must be cleared prior to entering a new tare.
*When zeroing, the scale reduces maximum indication of the same amount. Max value = 100%.
* Center of Zero (CoZ) cannot be displayed if showing a negative net weight.
4.1.4 View Wheel Weigh Pad Metrological Version
1. Press to turn on the wheel weigh pad.
2. Press during startup.
3. Metrological version briefly display (
,
) then weighing program version briefly displays (
,
,
).
Regulatory Parameter Weight on Scale
Tare in System
Front Panel Key Function
Tare
Zero
NTEP
Zero or negative
No
No action
Zero
Yes
Clear tare
Positive
No
Tare
Yes
Tare
OIML
Zero or negative
No
No action
Zero
Yes
Clear tare
Zero and Clear Tare
Positive
No
Tare
Zero
Yes
Tare
Zero and Clear Tare if weight is within ZRANGE;
No action if weight is outside of ZRANGE
Measurement Canada Zero or negative
No
No action
Zero
Yes
Clear tare
Positive
No
Tare
Yes
No Action
Industrial Mode
Allows users to configure industrial settings
NONE
Zero or negative
No
Tare
Zero
Yes
Clear tare
Positive
No
Tare
Yes
Clear tare
Table 4-2. Metrological Functions
