Configuration
© Rice Lake Weighing Systems
●
All Rights Reserved
31
4.1.1 Keyboard Lock
This prevents keys from accidentally being pressed during weighing.
1. Navigate to the wheel weigh pad Technical menu (
Section 4.1 on page 30
).
CAL
displays.
2. Press .
AduanC
displays.
3. Press .
CaL.Par
displays.
4. Press to scroll through parameter options until
Lock.kb
displays.
5. Press . The current keyboard lock setting displays.
6. Press to scroll through settings and press to save selection.
7. Press four times to back out of the menu.
displays.
8. Press .
briefly displays and unit returns to
Weigh
mode.
4.1.2 Default Wheel Weigh Pad
Total reset of memory and calibration to the manufacturer settings.
1. Navigate to the wheel weigh pad Technical menu (
Section 4.1 on page 30
).
CAL
displays.
2. Press .
AduanC
displays.
3. Press .
CaL.Par
displays.
4. Press .
DfLt.t
displays.
5. Press .
displays.
6. Press to default the wheel weigh pad.
displays while process runs, then
CaL.Par
displays.
7. Press two times to back out of the menu.
displays.
8. Press .
briefly displays, then
CaL
displays. See
Section 5.1 on page 38
to recalibrate the wheel weigh pad.
–
Advanced
Calibration parameters:
– Decimal point;
Settings:
,
,
,
– Division size;
Settings:
,
,
,
,
,
,
– Unit of measure;
Settings:
,
,
,
– Wheel weigh pad capacity;
Enter value: Max range =
– For multi-range wheel weigh pads;
Enter value
See
Section 5.1 on page 38
to calibrate the wheel weigh pad
For correct system operation, this parameter must be set to
Metrological parameters:
– Regulatory parameters menu : NTEP, OIML, Measurement Canada, Industrial Mode, NONE
(
Table 4-2 on page 32
)
– Reset percentage via key;
With approved scale:
; With non-approved scale:
-
– Sensitivity of the weight stability control;
Settings:
-
– Zero hold function (tracking);
Settings:
,
,
,
– Reset at power and reset percentage;
Settings:
,
(
–
)
– Manufacturer use only
– Manufacturer use only. Weight value for calibration converted for unit.
– Manufacturer use only
Keyboard lock (
Section 4.1.1
)
Access PIN to
Technical
menu; Settings:
,
(enter five digit pin number)
Access PIN to
User
menu; Settings:
,
(enter five digit pin number)
Total memory and calibration reset
Parameter
Description
Table 4-1. Wheel Weigh Pad Parameters and Descriptions (Continued)
