RT-500-M
RHOTHETA
Page 86 of 168
User Manual
7.4.2.4 Channel
Indication
It is possible to configure the indication of frequency/channel, which is then shown on the “Bearing”
page, in the left upper corner of the display (s. Figure 89).
Figure 89. Types of the frequency/channel indication
To change the type of frequency/channel indication, press “Edit Value” or “OK” while the line “Channel
Indication” is marked. The corresponding dialog will open (s. Figure 90).
Figure 90. "Channel Indication" dialog
o
Choose the desired type of frequency/channel indication pressing one of the hotkeys:
“Channel” (s. Figure 90, position 1): the corresponding appearance on the “Bearing”
page will be as shown in Figure 89, field C.
“Frequency” (s. Figure 90, position 2): the corresponding appearance on the
“Bearing” page will be as shown in Figure 89, field B.
“Ch/Freq” (s. Figure 90, position 3): the corresponding appearance on the “Bearing”
page will be as shown in Figure 89, field A.
o
Press the hotkey “Set Default” to set the default value for frequency/channel indication
(“Channel”).
