RT-500-M
RHOTHETA
Page 11 of 168
User Manual
After approximately 15 s the loading is completed and the indication changes to the “RT-500-
M” start screen for approx. 5 seconds (s. Figure 3).
Figure 3. RT-500-M start screen
6.
As a final result, the bearing page is loaded (s. Figure 4). This is the first page that is displayed
when the system is started for the first time.
The next time the device is restarted, the last page that was used before the restart will be
loaded after the start screen.
To turn off the DCU hold the ON/OFF button pressed for about 2-3 seconds.
Figure 4. Start page (bearing page)
7.
Adjust the needed main bearing frequency (the default frequency after first system start is
marine channel 16):
o
Push the hotkey “Freq.Ch.” (s. field “A”, Figure 4).
