RT-500-M
RHOTHETA
Page 113 of 168
User Manual
o
By default the current seconds value is inherited to the new setting. To reset the seconds value
to “00”, press the “Reset seconds” hotkey (s. Figure 134, position 2).
o
Use the “Set Default” hotkey (s. Figure 134, position 3) to reset the value to the default value
(internal time of the DCU real time clock).
Note
The default time setting can differ from the actual UTC time.
o
Confirm the changed value with “OK” or press “ESC” to leave the dialog without changing the
current setting.
Timezone
With this setting the time zone of the local time can be selected.
To change the time zone value, press the hotkey “Edit Value”, while “Timezone” is marked (s.Figure
135, position 1).
Figure 135. Selecting time zone setting
Following dialog appears.
Figure 136. "Select Timezone" dialog
o
Choose the proper time difference (local time) to the UTC time using the drop down dialog (s.
Figure 136).
o
Use the “Reset Values” hotkey to reset the value to the default value (UTC +00:00).
