RT-500-M
RHOTHETA
Page 111 of 168
User Manual
o
By pressing the “OK button or hotkey “Edit Value”, while the setting “Scan Page Settings” is
marked, the following dialog is opened (s. Figure 131).
Setting the “Go to
Bearing Page”
behavior
Setting the “Stay
on Scan Page”
behavior
Selecting the
default value
Figure 131. Scan page settings dialog
o
Choose the new setting using one of the hotkeys (s. Figure 131), which will then appear in the
“New Setting” field.
“OK: Stay”:
Pressing this hotkey defines that the “Scan” page should stay opened after
starting a scan algorithm by pressing “OK” (on the “Scan” page).
“OK: Go to B.”:
Pressing this hotkey defines that the “Bearing” page should be opened after
starting a scan algorithm by pressing “OK” (on the “Scan” page).
o
Press the hotkey “Set Default” to use the default value (“OK: Stay on Scan Page”).
o
Confirm the setting with “OK” or leave the dialog without adopting the new value by pressing
“ESC”.
7.4.3.14 Time Settings
This setting allows to select between the local and UTC time for operating the DF-system.
Any time-related indication in the DCU will be shown depending on this setting.
To change this setting press the hotkey “Edit Value” while the “Time Settings” line is marked (s. Figure
132, position 1).
Figure 132. Selecting the time settings
The following dialog appears (s. Figure 133).
