RT-500-M
RHOTHETA
Page 39 of 168
User Manual
If any scan algorithm is activated, this hotkey is designated with “Squelch”, or is empty (s. “Scan”
page). Pressing this hotkey will open the squelch dialog to adjust the squelch levels for the different
frequencies.
7.2 Scan Page
The “Scan” page enables starting scanning modes as simply and quickly as possible.
Various scan modes are shown as a list with the currently activated mode highlighted in green. If no
scan is currently active, all scan modes in the list are displayed in gray, where the currently marked
one is indicated by a green frame.
The scan procedures can also be configured on this page.
If a scan procedure has been activated, all relevant data of the activated mode will be displayed after
switching to the “Bearing” page. Figure 24 shows the most important elements of the “Scan” page.
Figure 24. Scan page. General view
Indication on Scan Page
Pos.
Element
Meaning / Description
„Start Scan“
Activates the currently marked scan algorithm.
On the “Setup” page you can set the behavior for when this hotkey is
pressed (switching to the “Bearing” page or remaining on the “Scan”
page, s. 7.4.3.13)
“Stop Scan”
Stops the currently activated scanning algorithm, regardless of
whether it is marked in the list or not.
“Excl. On/Off”
This hotkey appears only when the “Marine Scan” or “Scan List” is
marked.
By pressing this hotkey, the algorithm of the currently marked scan
mode takes the “Exclude List” into account during the scan.
If this setting was already activated for the currently marked scan,
pressing this hotkey will deselect this option and the “Exclude List” will
