RT-500-M
RHOTHETA
Page 74 of 168
User Manual
Indication on Setup Page, General Settings
Pos.
Element
Meaning / Description
„Set Operator“ /
„Set Admin“
Switches between two states:
-
Access level: operator
-
Access level: administrator
“Change PW”
Pressing this hotkey will lead to the dialog for changing the password
for the “Administrator” access level, where the old password has to be
entered first, whereupon the new password can be defined.
“System Info”
Opens a dialog which shows the information about the revisions status
of the used system components (s. 7.4.1.9).
“Freq. Info”
Opens a dialog which shows the currently available frequencies (also
not available or locked frequencies are shown) (s. 7.4.1.8).
“Edit Value”
Depending on the currently marked line, using this hotkey will open
the dialog for changing the corresponding value (s. descriptions
below).
“Reset Values”
Resets all values to the default settings (s. 13.4).
The default values themselves cannot be changed by the user
(RHOTHETA specification).
When there is a dialog opened, pressing this button will close the
dialog without adopting new values.
When there is no dialog opened, pressing this button will go back to
the last activated page. The Bearing Page is the end-point.
Pressing this button always leads to the Bearing Page. Even an
opened dialog will be closed, without adopting the changed values.
“Up” and “Down” arrows are used to select between the general
settings (move the green frame). Inside the dialogs (e.g. password or
value editing) they are used to navigate between the characters of the
virtual keypad.
“Right and “left” arrows have a function inside the dialogs, but not on
the top level of the “Setup” page.
With the “OK” button the confirming of values or opening the general
settings dialogs is accomplished.
Inside the general settings dialogs the “DEL” button is used to clear
the whole input at once. On the top level of the “Setup” page, this
button has no function.
Numeric keys are used to enter the numerical characters inside the
dialogs. On the top level of the “Setup” page they have no function.
Top line
Navigation line of the screen, which allows switching between setup
menus (“General”, ”Display”, “System”, “Interface” and “Service”).
Table 11. Setup page, general settings. List of elements.
