C O M M A N D S
Preset Commands
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
57
P
re
S
et
ADD
<preset #> <input #> <output
#>
Adds a route to a preset.
Example:
To add the routing of input 11 to output 6
to preset 51, use the command:
psadd 51 11 6
P
re
S
et
DISC
onnect
<preset #> <input #>
<output>
Disconnect a single existing route in a preset.
Example:
To remove the routing of input 21 from
output 17 from preset 23, type:
psdisc 23 21 17
RECALLP
re
S
e
T
<preset #>
Enter the desired preset number to load input/output
assignments.
Example:
To load preset 15, type:
recallpst 15
S
a
V
e
P
re
S
e
T
<preset #>
[input #,output #]
Enter only a preset number to save the current
input/output configuration. Enter a single input
number and output number to save to the selected
preset; other existing input/output assignments are
not modified. Input and output numbers must be
separated by a comma.
Example:
To save the current routing to preset 12,
type:
presetsave 15
Example:
To assign input 1 to output 6 in preset 10,
type:
svpst 10 1,6
SH
o
WP
re
S
e
T
<preset #>
Enter the number of the desired preset to display its
name, if entered, and all input/output settings.
Example:
To display information about preset 9,
enter the command:
shwpst 9
Table 6-5
Preset Commands (Continued)
Command
Arguments
Description
