P H Y S I C A L D E S C R I P T I O N A N D I N S T A L L A T I O N
Linx 3200S
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
8
RGB
2.1.1
Supplied Components
Accessories supplied with the
Linx 3200S
include two AC power cords, two rails for rear rack
mount support, 10 mounting screws for the rear rack mount supports and a CD that contains
this manual.
2.1.2
Front Panel Description
Features on the front panel include LED indicators, a two-line display, control knob, buttons,
and the air intake. See
Chapter 5
for a detailed description of the display, control knob and
buttons.
L E D I N D I C A T O R S
■
Active - Indicates network activity.
■
Link - Illuminates when an Ethernet link is present.
■
Alarm - If the system is overheated, this LED will be red.
■
Power A and Power B - Indicates that the power supplies are present and
powered on. If only one power supply is installed, the LED for the blank
supply will be red.
L E D D I S P L A Y
Rotate the control knob to step through the system information. Data displayed include:
A I R I N T A K E
Six 4-40 x 1/4” Phillips flathead screws hold the air intake cover in place. Remove these
screws to access the foam air filter(s).
See
Chapter 9
for instructions on cleaning and replacing the air filters.
2.1.3
Rear Panel Description
Features on the rear of the
Linx 3200S
include the input and output modules, and the AC
power connectors and switch, a 100/1000 BASE-T connector for control over Ethernet, and an
RS-232 port for serial control.
■
IP Address
■
Gateway IP Address
■
Subnet Mask Address
■
Mac Address
■
Model Name
■
Firmware Version
■
Hostname
■
Serial Port Baud Rate
■
Serial Port Echo State
■
Board Temperature
■
Maximum Temperature
CAUTION
Do not operate the
Linx DVI Switcher
without the air filters in place. Doing so will
cause the unit to overheat.
