P H Y S I C A L D E S C R I P T I O N A N D I N S T A L L A T I O N
Linx 800S
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
17
Figure 2-9
Front View
P O W E R S W I T C H
Use the front panel switch to turn the
Linx 800S
on or off.
L E D I N D I C A T O R S
■
Active - Indicates network activity.
■
Link - Illuminates when an Ethernet link is present.
■
Alarm - If the system is overheated, this LED will be red.
■
Power - Indicates the unit is powered on.
L E D D I S P L A Y
Rotate the control knob to step through the system information. Data displayed includes:
2.4.3
Rear Panel Description
Features on the rear of the
Linx 800S
include the input and output modules, AC power
connector, a 100/1000 BASE-T connector for control over Ethernet, and an RS-232 port for
serial control.
Input and output modules are keyed to prevent insertion into an incorrect slot. Each I/O card
is secured to the chassis with two screws. Each I/O connector has two capture-nuts to
secure signal cables.
All system connections are made to the rear panel. See
Chapter 8
for details on connectors
and pin-outs.
■
IP Address
■
Gateway IP Address
■
Subnet Mask Address
■
Mac Address
■
Model Name
■
Firmware Version
■
Hostname
■
Serial Port Baud Rate
■
Serial Port Echo State
■
Board Temperature
■
Maximum Temperature
po
w
er
al
ar
m
ac
tiv
ity
lin
k
Linx
Power Switch
LEDs
Display
Control Knob
