W E B C O N T R O L P A N E L O P E R A T I O N
Configuration Window
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
34
E N A B L E F O R C E H O T P L U G
Readies inputs for a hot plug event. Click this button then click the desired input status
box or the
All
button to force the hot plug event. Click this button again to disable it.
A P P L Y F O R C E H O T P L U G T O A L L I N P U T S
After clicking the
Enable Force Hot Plug
button, click
All
to force the event on all
inputs.
Click the configuration icon to display the
Configuration
window. This window is used to name
inputs and outputs and to set EDID parameters.
Figure 4-7 Configuration Window
4.3.1
Input Configuration
Select an input number from the drop-down list to begin configuration. The EDID drop-down
list stores 100 EDIDs. The list is populated with EDIDs captured or transferred in by the user.
To name or rename an input, type the desired name and press
ENTER
.
Note
Forcing a hot plug event may result in displays flickering, flashing, or going dark for a
second or two while the display reacquires sync.
4.3 Configuration Window
