Hold-o-mat
®
– Operating instructions
51
E
Controls 411 (other types, see additions)
Operation
Improper operation can cause fire!
For your own and the safety of others, please follow the safety notices
in these instructions precisely!
Switching on
Press the
button.
Operating
Use the
or
buttons to set the desired temperature. The
indicator always shows the desired and the actual temperature.
Pressing both buttons together
automatically sets the
temperature of 68 degrees.
Desired temperature
The desired temperature is reached within 20 to 40 minutes, depending
on what temperature has been chosen. The Hold-o-mat is designed to
respond to this slowly, but this ensures that the desired temperature is
maintained within a +/- 1°C tolerance.
The warming-up time can be shortened by setting a higher temperature
than actually required. Do not forget, however, to lower the temperature
in time (about 6 –10 °C below the desired temperature), otherwise the
unit will get too warm..
If the Hold-o-mat exceeds the desired temperature by 5 °C or more, the
actual temperature flashes to warn kitchen staff. To cool the unit slowly,
leave the door open slightly longer. (Thanks to its excellent insulation,
this takes somewhat longer than with other units.)
The desired temperature can be set to the degree in a range from 20 °C
to 120 °C. The PT sensor and excellent electronics, which approach
the desired temperature slowly step by step (a timing pulse system),
gua/- 1°C accuracy.
SET
REAL
68
54
1. Main switch – on/off
4. Program/Enter
2. Down
3. Up
5. Display
Heat indicator
Panel Hold-o-mat 411
