46 Hold-o-mat
®
– Operating instructions
Electrical supply,
power cable
Electricity can be lethal! Improper operation of the unit can cause fire.
For your own safety and the safety of others, please follow the safety
precautions precisely as outlined in these instructions.
Never touch live components. This could cause an electric shock which
can lead to serious injury or even death.
Only connect the unit to alternating current of 230 V (optional 110 V) /
50/60Hz. The plug must have a minimum fuse rating of 10A.
Never operate the unit with a defective power cable. Get a qualified
electrician to replace damaged plugs and cables immediately.
Do not run the power cable around corners or sharp edges and ensure
that the power cable cannot be crushed.
Never pull the unit by the power cable. Never pull the plug from the
socket with wet hands.
Protect the power cable from oil and never rest it on hot objects.
The three-pin plug must not be replaced by a two-pin one.
Location
Install the unit on a sturdy surface and make sure that all the unit‘s
openings are always freely accessible to ensure adequate air circulation.
Before use
Do not use if the unit is damaged or faulty.
Suitable containers
1/1 (2/3) trays and grills made of chrome nickel steel (CNS)
65 mm 1/1 (2/3) Gastronorm containers in conformity with EN 631,
made of CNS
100 mm 1/1 (2/3) Gastronorm containers in conformity with EN 631,
made of CNS
Unsuitable containers
Plastic, synthetic and other non-heat resistant containers.
Maintenance
Cleaning: Remove the plug and allow the unit to cool.
Repairs: If faulty or defective, remove the plug from the socket immedi-
ately. Never use a damaged unit.
Please note that the outside of the unit must not be sprayed with exces-
sive amounts of water or other liquids. Repairs must only be carried out
by authorised specialist electricians or by our repair service.
