LED wireless remote control
The LED wireless remote control is
used to set the colour modes.
The LED wireless remote control is
intended for use with SLE 45-65-
85 dehumidifier models that are
equipped with the RGB LED light
function.
The LED wireless remote control
has a coverage distance of up to
50 metres from the installation
location of the unit.
Sleep mode
If the LED wireless remote
control is not used for more
than 30 seconds, it switches
to sleep mode in order to save
battery power. Pressing any key
deactivates sleep mode and the
LED wireless remote control can be
used for setting again.
ON/OFF
(delayed)
Speed
Brightness -
Speed
Brig
Touch colour
wheel
Change mode
LED wireless remote control (RGB)
Using the LED remote control to
change modes
You can use the “Change mode”
key to select from 11 different
programs.
1.
Solid colour, red
2.
Solid colour, green
3.
Solid colour, blue
4.
Solid colour, yellow
5.
Solid colour, violet
6.
Solid colour, turquoise
7.
Solid colour, white
8.
RGB alternating
(jumping)
9.
Seven alternating colours
(jumping)
10.
RGB alternating
(cross-fading)
11.
All colour alternating
(cross-fading)
Changing the battery
The battery compartment is
located on the bottom of the
remote control. 1x CR2032
is inserted here. The battery
compartment must be closed
completely.
NOTE
Pay attention to the polarity
when inserting the battery.
CAUTION
If damage results in the LEDs
being directly visible, avoid
looking into the LEDs. The
high light intensity can cause
damage to the retina.
CAUTION
The fast light changes and light
intensity changes can affect
cognition, cause complaints
and trigger epileptic fits in
people prone to them.
18
REMKO SLE 45-85