■
Observe the regular care and
maintenance intervals
■
In accordance with the
operating conditions, the units
must be checked as and when
required, but at least once per
year, by a specialist to ensure
that they are in a condition that
is safe to use
■
Keep the units free of dust and
other debris
■
If the unit is contaminated, it
can be cleaned using a vacuum
cleaner. The condenser in
particular must be vacuumed
thoroughly
■
If the evaporator’s fins are
heavily soiled, they can be
cleaned carefully with soapy
water
■
Never subject to direct jets of
water
e.g. pressure washers etc.
■
Never use abrasive or solvent-
based cleaners
■
Use only suitable cleaners, even
for heavy contamination
Care and maintenance
All moving parts have a low-
maintenance permanent coat of
lubricant. The refrigerant system is
designed as a hermetically sealed
system and may only be repaired
by a specialist.
NOTE
Regular care and maintenance
is fundamental to a long
service life and fault-free
operation of the unit.
Cleaning the suction filter
Check the suction filter at regular
intervals and clean if necessary.
The filter is secured in the intake
grille on the front panel.
■
Light filter contamination can be
remedied with careful blowing
or suction
■
Heavier contamination may be
remedied by rinsing the filter in
a lukewarm (max. 40 °C) soap
solution Finally, always rinse the
filter carefully with clear water
and allow to dry
■
Before refitting the filter, ensure
that its fully dry and that no
damage has been sustained
■
The units may only be operated
with the filter in place
Cleaning the condensate
water collection tray
To ensure that the condensate
water that accumulates can always
drain freely, the collection tray for
the condensate and the drain must
be cleaned regularly.
NOTE
Heavily contaminated filters
must be replaced with new
parts.
Only original REMKO spare
parts may be used.
CAUTION
Check the intake and outlet
openings, as well as filters,
regularly for contamination.
19