NOTE
Adjustment and maintenance
work may only be carried out
by authorised
and qualified technicians.
Customer service and
Guarantee
As a prerequisite for any guarantee
claims to be considered, it is
essential that the ordering party
or its representative completes
and returns the
“Certificate of
guarantee”
to REMKO GmbH &
Co. KG at the time when the units
are purchased and commissioned.
The units were tested at the
factory
several times to verify their correct
function.
However, if malfunctions should
arise that cannot be remedied by
the operator with the assistance of
the troubleshooting section, please
contact your specialist dealer or
contractual partner.
Intended
use
Environmental
protection and
recycling
Disposing of packaging
When disposing of packaging
material, please consider our
environment.
Our units are carefully packed
and delivered in stable cardboard
transport packaging and, if
applicable, on a wooden pallet.
The packaging materials are
environmentally-friendly and can
be recycled.
By recycling packaging materials,
you make a valuable contribution
to the reduction of waste and
conservation of raw materials.
Therefore, only dispose of
packaging material at appropriate
collection points.
Disposal of the old unit
The manufacturing process for
the units is subject to continuous
quality control.
Only high-grade materials are
processed, the majority of which
are recyclable.
You also contribute to
environmental protection
by ensuring that your old
equipment is only disposed of in
an environment friendly manner.
Therefore, only bring the old
unit to an authorised recycling
business or to an appropriate
collection point
.
NOTE
Operation other than the types
listed in this operating manual
is prohibited.
With non-observance, any
manufacturer liability or
guarantee claims are voided.
Important information
concerning recycling
The units are operated with
environmentally-friendly and
ozone-neutral R407C refrigerant.
The mixture of refrigerant and oil
within the unit must be disposed
of properly in accordance with
the statutory or locally-applicable
regulations.
The units are designed exclusively
for dehumidification purposes on
the basis of their structural design
and equipment.
The manufacturer shall not
be liable for damage resulting
from non-observance of the
manufacturer's specifications, the
respective local legal requirements
or from arbitrary alterations to the
units.
CAUTION
Copyright
Redistribution, even in part, or
use of this documentation for
purposes other than intended
is strictly prohibited without
the written authorisation of
REMKO GmbH & Co. KG
.
24
REMKO SLE 45-85