Regency Fireplace Products Greenfire GF950L Series, Owners & Installation Manual

Page: 10 / 104

10
Regency GF950L-2 Gas Fireplace
installation
FRAMING DIMENSIONS
Framing
Dimensions
Description GF950
A Framing Height 940 mm combustible finish
A
¹
Framing Height -Steel Stud 756mm non combustible steel stud
B Framing Width 1127 mm
C Framing Depth 552 mm
D Minimum Height to Combustibles 1156 mm
E Corner Wall Depth 1273 mm
F Corner Facing Wall Width 1800 mm
G flue Centerline Height 991 mm
H* Non-combustible facing height *see non-combustible facing height in this manual
I Gas Connection Opening Height 38 mm
J Gas Connection Height 67 mm
K Gas Connection Inset 44 mm
L Gas Connection Opening Width 89 mm
NOTE: A minimum thickness of 12mm non-combustible facing board compliant with AS1530-1 and AS1530-3 is required
when using the non combustible flush finishing option.
A minimum thickness of 10mm-19mm combustible facing board is required when choosing the combustible flush finishing option.
Note: must maintain 13mm air gap all around the perimeter of the appliance when choosing this option.
D
G
H
Non-Combustible
Facing
Header
F
E
I
J
K
L
Flex or Rigid Pipe
Drywall or
other facing
C
C
A
B
C
Timber
Studs
Finished Floor
A
B
C
Timber
Studs
Finished Floor
Non-combustible Flush Finishing Framing
A
1
Steel Stud
on edge
NOTE:
Do not place timber
studs below the timber fram-
ing studs already in place.
Additional steel studs must
be added as shown when
choosing the non combus-
tible flush finishing option.
Note: Steel stud must be installed
after unit has been positioned in
place and prior to installation of
non- combustible finishing
Note: If raising the unit, then the
minimum framing height mea-
surement (A) must be adhered to.
For example: Unit raised 300mm
then A+ 300mm = 1240 mm.
Combustible flush finishing Framing
IMPORTANT NOTE:
This unit can be finished
with combustible facing
material of thickness range
10-19mm OR non-combus-
tible facing material of a
minimum thickness 12mm.