COPYRIGHT © 2016 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
955-0116_V6.1, REV-U | 178
RECORD/MONITOR OUT PORTS
3G-SDI (HD-SDI) OUT
The following expanders feature an HD-SDI connector:
DSMC
2
Base Expander
DSMC
2
Base I/O V-Lock Expander
A standard 75 ohm BNC connector provides the following output:
Broadcast specification 3G-SDI (HD-SDI) video output (default mode is Clean)
Two (2) channels of embedded audio
Time of Day and Edge timecode
Record Tally flag
Clip name information (as SMPTE RP-188 VITC2 HANC metadata)
For more information, go to
The 3G-SDI (HD-SDI) output provides the formats described in the table below:
3G-SDI (HD-SDI) OUTPUT FORMATS
1
VIDEO FEED
2
FREQUENCY (HZ)
3
SMPTE STANDARD
720p
23.98, 24.00, 25.00, 29.97, 30.00, 50.00, 59.94
SMPTE ST 292-1 (1.485 Gbps)
1080p 10-bit 4:2:2
23.98, 24.00, 25.00, 29.97, 30.00
SMPTE ST 292 (1.485 Gbps)
1080p 10-bit 4:2:2
50.00, 59.94, 60.00
3G-SDI
SMPTE ST 424 (2.970 Gbps)
SMPTE ST 425 (2.970 Gbps)
1. Ensure you select a frequency supported by your monitor.
2. The output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
3. The frequency options depend on project time base. If you have a non-drop frame project time base (such as 24.00), you can select
only non-drop frame frequencies. If you have a drop frame project time base (such as 23.98), you can select only drop frame frequencies.
75 OHM BNC CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
Center
3G-SDI
SMPTE ST 424
Out
Shield/Screen
GROUND
Camera ground
N/A
COMPATIBLE CABLE
790-0341
: RED
®
HD-SDI Cable (6')
