RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
COPYRIGHT © 2016 RED.COM, INC
955-0116_V6.1, REV-U | 149
11. Turn on the camera.
The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR
and REC LEDs flash green and nothing displays on the external monitors.
12. If this is your first time upgrading firmware, a pop-up menu opens with the Software License Agreement
(SLA). Select
Agree
.
NOTE:
If you do not agree to the SLA, the camera cannot be used. The SLA continues to display until it is
accepted.
13. Go to
Menu
>
Settings
>
Maintenance
>
System Status
>
Camera Info
and verify that the firmware version listed
matches the firmware version that you downloaded.
14. To restore user-generated preset files to your camera, follow the instructions below:
A. Turn on the camera and insert the SSD with the saved preset files into the camera.
B. Go to
Menu
>
Presets
and copy user-generated Camera Preset and Look files from the SSD to the cam-
era.
C. Go to
Menu
>
Settings
>
Display
>
Monitor Control
>
Overlays
and copy user-generated Overlay files from
the SSD to the camera.
15. After offloading firmware upgrade files and preset files from an SSD, reformat the SSD before recording.