RED SCARLET-W Series Operation Manual Download

Page: 42 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 42

VIDEO MONITOR CATEGORIES

NOTE

: HD-SDI and HDMI ports are only available on select DSMC

expanders. For more information, go to

“Input/Output Connectors” on page 198

Video monitor outputs are separated into three (3) categories:

VIEWFINDER

: The Upper Status Row, Live Action Area, and Lower Status Row display. Default output is the

EVF/LCD connector located on top of the camera. If an EVF or LCD is not connected, you can transfer the

VIEWFINDER output to either the HDMI or 3G-SDI (HD-SDI) output from an expander.

PROGRAM/Clean

: None of the graphic overlays display.

PREVIEW

: The Live Action Area and associated graphic overlays display.

For more information about changing the video monitor category of your monitor, go to

“Monitor Control” on

page 71

RECORD

Perform one of the following actions to begin recording:

Press

PWR/REC

on the camera.

Press

REC

on the media bay.

Press

START/STOP

on the DSMC

Top Handle or DSMC

Outrigger Handle.

Double-Tap Right 25% to Record

on an attached touchscreen display (when enabled).

NOTE:

To enable Double-Tap Right 25% to Record, go to

Menu

Settings

Display

Monitor Control

Advanced

Gestures

RECORD VIA HD-SDI OR HDMI

NOTE

: HD-SDI and HDMI ports are only available on select DSMC

expanders. For more information, go to

“Input/Output Connectors” on page 198

NOTE

: The secondary LCD/EVF port (on the side of the camera) and the HDMI port cannot be used at the same

time. For more information, go to

“LCD/EVF 2 / HDMI Select” on page 69

This section describes how to record via HD-SDI or HDMI through simultaneous record (recording to an SSD

and an external recorder at the same time) or external record only.

SIMULTANEOUS RECORD

NOTE

: HD-SDI and HDMI ports are only available on select DSMC

expanders. For more information, go to

“Input/Output Connectors” on page 198

You can record simultaneously to an external recorder and a RED SSD. To record simultaneously, follow the

instructions below:
1. Attach a DSMC

expander that has an HD-SDI or HDMI port.

2.  Connect the camera to an external recorder with an HD-SDI or HDMI cable.
3.  Ensure an SSD is inserted in the camera and formatted.
4.  Begin recording.

Summary of Contents for SCARLET-W Series




































































































































































































Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands

RED SCARLET-W Series, Operation Manual

Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands