RED SCARLET-W Series Operation Manual Download

Page: 21 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 21

DSMC

JETPACK EXPANDER

The DSMC

Jetpack Expander is specifically designed for aerial, gimbal, handheld, and other lightweight/

remote configurations. This expander features standard connectors for power (DC-IN), CTRL, and SYNC for all

of your Timecode and Genlock needs. In addition, the DSMC

Jetpack Expander offers custom-tailored support

and connectors for HDMI and USB power out—perfect for housings and low-profile setups.
The DSMC

Jetpack Expander also features a selector switch that enables the camera to automatically boot

when power is provided via the DC IN connector on the expander. This feature allows you to use a connected

DC input supply to turn the camera on and off when the camera is mounted in remote or difficult to maneuver

locations.

NOTE

: Only one (1) expander module can be used at a time.

DSMC

Jetpack Expander

Summary of Contents for SCARLET-W Series




































































































































































































Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands

RED SCARLET-W Series, Operation Manual

Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands