RED SCARLET-W Series Page 11 Operation Manual Download

Page: 11 / 200

RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W

955-0116_V6.1, REV-U | 11

ADDITIONAL RESOURCES

The following resources offer additional information about RED, the camera system, and the RED community:

RED.com

: Check the

official RED website

for the latest information about RED products.

RED Learn Articles

: RED offers

in-depth technical articles

about RED cameras, post production, and digital

cinematography.

RED.com/downloads

: Go to the

RED Downloads page

to download the latest firmware, operation guides,

and post production software.

DSMC Toolkit

: Go to the

RED Downloads page

to find the DSMC Toolkit, which offers many helpful tools and

resources to customize and improve your camera workflow.

Support.red.com

: Check the

RED SUPPORT site

for FAQs, or to file a support ticket.

Bomb Squad Support

: For more information, contact your Bomb Squad representative.

In-Camera Help

: Select the

Help

button on an in-camera screen to open up the help for that screen.

Reduser.net

: Discuss all things RED on the

REDUSER

third-party forum.

Summary of Contents for SCARLET-W Series




































































































































































































Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands

RED SCARLET-W Series, Operation Manual

Search results

Summary of Contents for SCARLET-W Series

Reviews:

Related manuals for SCARLET-W Series

Brands by name

Popular brands