RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
COPYRIGHT © 2016 RED.COM, INC
955-0116_V6.1, REV-U | 91
To use Frame Trigger mode, follow the instructions below:
1. Go to
Menu
>
Settings
>
Recording
>
Mode
.
2. Select
Frame Trigger
from the
Mode
drop-down menu.
3. Use the
Limit Recording to
fields
to set the recording to end at a predefined frame limit (optional).
4. Select a
Pre Count
and
Post Count
. For more information, go to
“Pre Count and Post Count” on page 93
.
5. Close the menu.
6. Start recording.
The overlay displays the number of frames recorded out of the total amount of frames.
NOTE:
There may be a delay between receiving the external trigger and capturing the next frame(s). The delay
may be as long one (1) frame period at the current recording frame rate. To completely synchronize frames to
an external trigger, set
Sensor Sync Mode
to
MoCo
. For more information, go to