COPYRIGHT © 2016 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
955-0116_V6.1, REV-U | 150
All RED
®
products are designed for rugged durability, but precision instruments demand proper care. Follow the
instructions in this chapter to clean, maintain, and store RED devices.
WARNING:
DO NOT rinse or immerse the camera or other accessories in water. Keep dry at all times.
WARNING:
DO NOT use soaps, detergents, ammonia, acetone, alkaline cleaners, abrasive cleaning compounds,
or solvents. These substances may damage lens coatings and electronic circuitry.
WARNING:
DO NOT use an excess of cleaning solution.
WARNING:
DO NOT reuse swabs or wipes.
WARNING:
DO NOT attempt to clean the sensor or optical cavity for any reason. If the sensor becomes dirty,
contact your Bomb Squad representative.
WARNING:
DO NOT attempt to modify, dismantle, or open the camera, lens, or other accessory as doing so
may expose you to electric shock and serious injury. There are no user-serviceable parts inside. Alteration or
repairs made to the camera, lens, or other accessory, except by a RED authorized service facility, voids the all
warranties.
WARNING:
Use caution with compressed air and gas dusters, since the high pressure, oily residue, cold air,
particulates, and moisture may cause damage. You may use a filtered, non-residue gas duster to clean non-
critical areas, such as around the fans and other recesses on the exterior of the camera. Damage to the camera
or other components of the camera system caused by using compressed air or gas dusters is not covered
under warranty.
WARNING:
DO NOT use compressed air and gas dusters on the sensor or on any optics.
BRAIN AND ACCESSORY EXTERIOR SURFACES
Use a filtered, non-residue gas duster to clean non-critical areas, such as around the fans and other
recesses on the exterior of the camera.
Clean with a dry lint-free cloth. When cleaning your camera and accessories, remember that the devices
are not waterproof and moisture can damage electronic circuitry.
BRAIN AND ACCESSORY STORAGE
RED recommends that you store the camera and accessories in the water-resistant cases available in the
at
. These cases feature laser-cut foam to keep the camera and accessories secure.
WARNING:
DO NOT store the camera or accessories in any place with extreme temperatures, direct sunlight,
high humidity, severe vibration, or strong magnetic fields.
09
CAMERA SYSTEM
MAINTENANCE
