27
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Illuminator Settings Mode Detail:
Enter this mode by a momentary press of LHS button to turn LHS LED solid RED.
Pressing the LHS button again will turn the LED solid GREEN and pressing a third
time will turn the LED solid AMBER. Each of these colours indicates which setting
mode you are in.
A further momentary press of LHS Button will exit from the mode entry, both LEDs
will go out for 1 second and then return to the standard indication of either operating
mode or programming mode (depending on which mode the Illuminator was in
previously before selecting manual controls).
The following modes are available :
Power Level Mode (LHS LED : Solid RED)
RHS LED :
20% Power Setting: 1 Flash GREEN
40% Power Setting: 2 Flashes GREEN
60% Power Setting: 3 Flashes GREEN
80% Power Setting: 4 Flashes GREEN
100% Power Setting: 5 Flashes GREEN
Photocell Level Mode (LHS LED : Solid GREEN)
RHS LED:
Low sensitivity: 1 Flash GREEN
Medium Sensitivity: 2 Flashes GREEN
High Sensitivity: 3 Flashes GREEN
Disabled photocell: Solid RED
Enable / Disable Status Indicator LEDs Mode (LHS LED: Solid AMBER)
RHS LED:
Enable LEDs: Solid GREEN
Disable LEDS: Solid RED
NOTE
: If no buttons are pressed within 2 minutes the Illuminator times out and
returns to the previous mode it was in – either operating or programming mode.
