21
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Extra VRC Functionality
PIN Function
: For extra security VARIO2 allows a PIN (Personal Identification
Number) to be set for each lamp
The PIN is set by using the Vario Remote Control (VRC). There are five buttons /
characters on the remote that can be used for this purpose.
Note: Unless detailed as part of the functionality, if an invalid or blocked command is attempted, both LEDs will
flash RED
Disable Manual Button
Hold disable remote
button for 4 seconds to
disable manual buttons.
Can only be completed
if the remote control has
already been disabled.
This must be done
within 5 minutes of
disabling remote.
PIN Set
Hold STATUS button for 4
seconds to enter PIN Mode
5 Valid PIN Characters
Shown with a
circle..
