23
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
If an illegal character is used when entering a pin, it will be ignored and the PIN
character count will not reduce.
To delete an existing PIN you first need to be in Programming Mode by entering your
PIN. Once in Programming Mode, press STATUS BUTTON for 4 seconds to go into
PIN set mode. LHS LED will flash RED / GREEN and RHS LED FLASHING RED.
Instead of entering one of the known legal characters press the RESET BUTTON four
times. The illuminator will return to programming mode. Note – if you delete the PIN
and the illuminator times out into operating mode, you will not be able to go back to
programming mode without recycling the power.
