8
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Remote Control Operation
PIN set and Manual Button Disable / Enable
Action
Required
Available
Mode
Step 1
Step 2
LHS LED
RHS LED
Comment
Disable
Remote
Programming
Mode
Press
<Disable
Remote
Control>
button on
VRC for 4
seconds
N/A
Solid
Green
Flashing Amber
to Solid Amber
to Off
Illuminator will go to
Operating Mode. RHS
LED turns Off when in
Operating Mode
Disable
Manual
Buttons
Operating
Mode
Press
<Disable
Remote
Control>
button on
VRC for 4
seconds
N/A
Solid
Green - After
4 seconds
Flashing Red
(Returns to
Solid Green
after button
release)
Off to Solid
Amber, then
after 4 seconds
Flashing Red
(Returns to Solid
Green after
button release)
Must be done within 5
minutes of Disabling
remote (as above)
Change will take affect
after 30 minutes
Create or
Change
PIN
Programming
Mode
Press
<Status
Button> for 4
seconds
Enter
valid PIN
characters
x 4
Green to
Intermittent
Flashing Red
/ Green
Solid Amber to
Flashing Red
Flash qty counts
down the No.
of Characters
required
After PIN created
illuminator goes to
Programming Mode
(Standard LED
indication)
Enter
Existing
PIN
Operating
Mode
Press
<Status
Button> for 4
seconds
Enter
valid PIN
characters
x 4
Green to
Intermittent
Flashing Red
/ Green
Solid Amber to
Flashing Green
Flash qty counts
down the No.
of Characters
required
If invalid PIN entered
both LEDs fl ash Red
and unit will stay in
Operating Mode
Delete PIN
Programming
Mode
Press
<Status
Button> for 4
seconds
Press
<Re-Set>
button 4
times
Green to
Intermittent
Flashing Red
/ Green
Solid Amber to
Flashing Red
Flash qty counts
down the No.
of Characters
required
After PIN deleted
illuminator goes to
Programming Mode
(Standard LED
indication)
For full PIN function detail (inc valid PIN characters) – see FULL instruction guide.
