Raytec VARIO2 series Full Installation And Setup Manual Download Page 55

Page: 55 / 60

raytecled.com

Raytec Global Tel: +44 (0) 1670 520055

Americas Tel: +1 613 270 9990

Log Off

We recommend after using the illuminator web interface that users log off using
the Log Off Page.

The certificate and private key files must be in .der format.
Raytec VARIO2 IPPoE illuminators use ECDSA encryption with 256-bit keys, uploading

certificate and private key files that are incompatible with this will lead to errors.
We highly recommend that you use the DiscoMan Tool to upload certificates to the

lamp as this takes care of the file format and allows you to update multiple lamps at

the same time. The DiscoMan Tool also allows you to become your own Certificate

Authority (CA) and can create certificates based on an imported one too.

(DiscoMan

Version 2 and above)

For full set up details please download the separate HTTPS User Guide from the

Raytec website

Summary of Contents for VARIO2 series





























































Search results

Summary of Contents for VARIO2 series

Reviews:

Related manuals for VARIO2 series

Brands by name

Popular brands

Raytec VARIO2 series, Full Installation And Setup Manual

Search results

Summary of Contents for VARIO2 series

Reviews:

Related manuals for VARIO2 series

Brands by name

Popular brands