17
raytecled.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Name
VARIO2IP
Group Name
<<Deliberately Left Blank>>
IP Address
Software version 2.5.x or above : Automatically assigned by
DHCP if connected to a DHCP network otherwise IP address
starts with 169.254 followed by 2 random octet numbers.
Software version <2.5.0: Static IP Address 192.168.2.80
Enable DHCP Checkbox
Selected – IP address will be automatically allocated. If
illuminator is being operated on a DHCP enabled network, DHCP
can be selected for automatic allocation of IP address.
Illuminator Mode
Local: Control the illuminator using the web interface. Illuminator
will respond to its own photocell and telemetry events.
HTTP Port
80
HTTPS Port
443
Disable HTTP
Unchecked/Not disabled by default
Standard Setup – Factory Defaults
The illuminator is operating in Local mode and will respond only to its own photocell
and telemetry status. By default the illuminator is NOT assigned to a group.
The illuminator will turn ON / OFF automatically when the photocell detects it is
dark / light at 100% (soft start) via the photocell.
The External Input will activate the illuminator at 100% (NOT soft start) for the
duration of the input provided the photocell detects it is dark.
External Output: activated by photocell and will become active when short circuit,
unless changed in advanced settings on the GUI.
The lamp has a self-signed certificate installed on it. There is no chain of trust
here and as such you will receive browser warnings if you attempt to access the
lamp’s web interface using HTTPS prior to uploading your own certificate.
Factory Defaults
Photocell
External Input
Trigger Control
Illuminator Control
Illuminator Control
Respond to Group Commands
No, ignore group command
No, ignore group command
Illuminator Mode on Trigger
On
On
Power (%)
100%
100%
Duration
All night
Duration of Input
Soft Start
On
Off
Deterrent
Pattern = SOS
Frequency = Slow
