35
raytecled.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
For the Photocell input the user can select
All Night
in which case the illuminator
will stay ON (if ON command is selected) for the whole period of time that the
photocell indicates it is dark. Alternatively, a specific time period can be selected
using the slider bar.
The timer will only operate whilst the photocell indicates it is dark. If the photocell
indicates it is light before the timer has elapsed then the timer is ignored and the
light turns OFF.
For the External Input, the user can select
For Duration of Input
in which case
the illuminator will stay ON or deter (if ON or deter command is selected) for the
whole period of the duration of the input.
Alternatively, a specific time period can be selected using the slider bar. The
illuminators will operate immediately and the timer duration starts from the end
of the External Input signal. The External Input can be reactivated within the timer
period and it will have the effect of restarting the timer.
The illuminator will stay ON until the end of the timed period even if the illuminators
photocell states it is daylight.
Min and Max timer settings are:
Photocell Min:
30 mins
External Input Min:
1 mins
Photocell Max:
720 mins
External Input Max: 60 mins
Factory Defaults: Photocell
All Night
External Input Duration of Input
Soft Start
There is the option, when a valid on instruction is received, for the illuminator
to either start immediately (Soft Start Off) or to ramp up to selected power level
(Soft Start On).
The length of time of the ramp up depends on power level selected. (Max 10
seconds for 100% power)
Factory Defaults: Photocell
On
External Input Off
