manualshive.com logo in svg

Raytec VARIO2 series, Full Installation And Setup Manual

Share
Download
Raytec VARIO2 series Full Installation And Setup Manual Download Page 22

22

raytecled.com

Raytec Global Tel: +44 (0) 1670 520055

Americas Tel: +1 613 270 9990

Raytec DiscoMan Tool

The Raytec DiscoMan Tool can be obtained from the Raytec website.  Once 
installed, run the application and press 

Refresh

.

The Raytec DiscoMan Tool will discover and display all VARIO2 IPPoE Illuminators 
on your network. Double click on an illuminator to navigate it. 
The illuminator responds to multicast messages - and therefore does not need to 
have a valid IP address in the same network range for the Raytec DiscoMan Tool 
to find it. But it does require a valid IP address for connection and communication.

The Raytec DiscoMan Tool allows you to:-

•  Discover all illuminators on the network – illuminators do not need a valid IP 

address to be discovered

•  Alter IP address of illuminator(s) – illuminators must have a valid IP address 

to allow communication

•  Disable / Enable DHCP
•  Navigate directly to each illuminator – once a valid IP address has been 

assigned

•  See the illuminators status
•  See whether the illuminator is ON / OFF
•  View the MAC address of each illuminator
•  Change Network Settings 
•  Change the Name and Group Name 

(DiscoMan Version 2 illustration)

Summary of Contents for VARIO2 series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands