34
raytecled.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Lamp Mode On Trigger
This dictates the status of the illuminator on receipt of a valid instruction from
Photocell and/or External Input. For both the Photocell and the External Input, the
illuminator can either be programmed to stay off or to turn on.
In addition, the External Input can activate the Deter mode (see Deterrent Patten
& Frequency for configuration)
Factory Defaults: Photocell
On
External Input On
Power
This dictates the power level that the illuminator turns on at in response to a valid
instruction. Power levels can be set from 20% to 100% using the slider bar.
Factory Defaults: Photocell
100%
External Input 100%
Duration
This will dictate how long the illuminator will stay on (if ON command is selected
for the Lamp Mode Trigger) on receipt of a valid instruction.
Some examples of illuminator functionality in a group:
• All illuminators can come on at the same time and go off at the same time by
either Photocell or Ext input control from a single illuminator
• The Group Override function on the Home Page allows the user to take
instant control of the group of illuminators all at the same time
